CR 10 SE 3D Printer

Solid Foudation for Print QualityThe first layer printed by CR-10 SE 3D Printer is neat, firm, and uniform. lt is meant to take the print quality and success rate to a new level.

Hands-free Leveling to Get Ideal First LayerCR-10 SE uses both a CR Touch and a strain sensor to do leveling and Z offset automatically the first time it is powered on. It delivers an excellent first layer without you lifting a finger.

Linear Rails, Precise and DurableThe precise linear rails on the X and Y-axis have carriage slides containing ball bearings, making each move accurate, steady, and frictionless (0.04 friction coefficient*). Built out of stiff bearing steel, they will stay as new even after long-time use.

Effective Model Cooling FanA 12000rpm fan sends a strong wind via a U-shaped air duct to cool the freshly printed model section from three sides. It improves the bridges and overhangs significantly and makes the details more vivid. Advanced Capabilities :-

• Hands-free Auto Leveling

•  Linear Rails at X & Y-Axis

•  Dedicated Model Cooling Fan

•  600mm/s High-speed Printing

•  Input Shaping

•  Hotend with 60W Ceramic Heater

•  Compatible with Diverse Filaments

•  Rich DIY Accessories

Product Specifications of CR 10 SE 3D Printer

Build Volume: 220*220*265mm

Leveling Mode: Auto leveling

Product Dimensions: 490*470*625mm

Display Screen: 4.3″ touch screen

Printing Speed: ≤600mm/s (Data from printing test with Hyper PLA)

Mainboard: 32-bit mainboard

Acceleration: 8000mm/s²

Connectivity: USB drive, WiFi

Printing Accuracy: 100±0.1mm

Printable File Format: G-code

Layer Height: 0.1-0.35mm

Power Loss Recovery: Yes

Filament Diameter: 1.75mm

Filament Runout Sensor : Yes

File Transfer: USB drive, LAN printing, cloud printing

Lighting Kit: Yes

Nozzle Diameter: 0.4mm (default)

AI LIDAR: Optional

Build Surface: Flexible build plate

Camera: Optional

Nozzle Kit Heatbreak: copper + titanium alloys Nozzle: hardened steel

Rated Voltage: 100-120V~, 200-240V, 50/60HZ

Nozzle Temperature: ≤300°C

Rated Power: 350W

Heatbed Temperature: ≤110°C

Slicing Software: Creality Print, Cura, Simplify3D, PrusaSlicer

Extruder: “Sprite” direct drive extruder

Formats for Slicing: STL, OBJ, 3MF, STEP

Supported Filaments: PLA, PETG, PET, TPU, PLA Wood, ABS, ASA, PA, PLA-CF

UI Languages: English, Español, Deutsche, Français, Pyсckий, Português, Italiano, Türk